THE LEADER OF
ULTRA HIGH PERFORMANCE
3D PRINTER
1. Heat control system
2. High temp. hotend
3. hotbed
4. hot chamber
5. Direct Annealing System
6. Cooling system
7. liquid cooling
8. Air pump cooling
1. Hotend max. 500°C with dual extruder
2 Heatbed max.200°C
3. Hot chamber max. 120°C
4. Build volume: 300 x 300 x 400 mm
5. Triple heat isolation and liquid cooling system
The Direct Annealing System (DAS) is a revolutionary technology designed and patent protected by CreatBot. It is the most advanced technology applied to 3D printing high performance material.
1. Engineering Plastics: PLA, PC, ABS, PA6, PETG, PVDF, POM-C, PP, TPU
2. High temperature Material: PPSU, PEI (ULTEM), PA12, PSU, PPS, PA-CF
3. Ultra performance material: Medical grade PEEK, PEEK, PEKK, CF-PEEK (Carbon fiber), GF-PEEK (glass fiber), etc
CreatBot PEEK-300 is an industrial grade 3D printer, focusing on high performance materials such as PEEK, PEKK, PEI (Ultem), etc. It is designed for high reliability and economical 3D printing of high performance functional materials. CreatBot has more than three years of PEEK 3D printer manufacturing experience, and has a wealth of 3D printing experience and material identification experience for various high performance materials such as PEEK, Ultem. Our headquarter is located in Zhengzhou City, Henan Province, China, and we have multiple manufacturing and research facilities dedicated to the highest manufacturing design and quality standards. PEEK-300 came into being in 2019.
We can guarantee that PEEK-300 3D printer is comparable to any PEEK 3D printer in performance as far as you know. PEEK-300 3D printer’s leading position in the world is determined by the temperature of the nozzle, hot bed or constant temperature chamber, water cooling system and the world’s most advanced controlled thermosetting technology. However, it is more competitive and attractive in terms of price, and it is suitable for the customization needs of high-performance materials in scientific research, medical, military, and advanced manufacturing.
Internationally, our company works with industry leaders, to provide state-of-the-art 3D printing solutions that are optimized for the specific needs of the industry and organization. Today, CreatBot 3d printers are supported and trusted by industry leaders, such as Volkswagen Group, NASA, Airbus, Bosch, TE Connectivity, School of Materials Engineering, Oxford University, Johns Hopkins University School of Medicine, China University of Aeronautics and Astronautics, and a number of confidential scientific research units in China.
Direct Annealing System (DAS), the world’s first and extraordinary technology by CreatBot. Annealing process is instant controllable during printing. It aims to provide best quality parts in one time without warping and cracking printing of big size functional materials. (The technology is patent protected and available by CreatBot only)
Reliable and amazing.
The conqueror of all kinds of plastics.
Common but necessary.
Base of printing big models with no warping.
Outstanding and important.
The protector of no cracking printing.
Triple heat isolation is made of double insulation chamber, advanced insulation materials and vacuum double PC boards. It is guarantee of ultra performance and safety.
Cooling system is one of the important parts to constitute the whole thermal system. It is made of
(1) liquid cooling. Circulating liquid can be used effectively for a long time.
(2) Air pump cooling. Air pump provide cold air from outside instead of hot air inside chamber.
The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space.
0.04mm is an available resolution for normal plastics, but it is an extraordinary resolution for high warping and high deformation materials. 3D printing high performance material need not only high temperature, but better cooling. For high resolution with high small details, high temperature will ruin layers to a mess if heat and cooling are not in a balance.
| Printing | |
|---|---|
|
Build Volume |
300*300*400mm |
|
Print Resolution |
0.04mm-0.4mm |
|
Number of Nozzles |
Dual Extruder |
|
Print Speed |
10-150mm/s |
|
Filament Diameter |
1.75 mm |
|
Filament Compatibility |
Engineering Plastics: PLA, TPU, PC, ABS, PA6, PETG, PVDF, TPU |
|
Nozzle Diameter |
0.4mm (0.3~1.0mm optional) |
| Electrical | |
|---|---|
|
Input Power |
200V~240V, 20A |
|
Max. Power |
3000W |
|
Screen |
4.3'' full color touch screen, multi-language |
|
Print Method |
USB Connectivity/USB Disk |
| Mechanical | |
|---|---|
|
Cooling |
Air pump cooling & water cooling |
|
Platform |
PCB aluminum + PEEK print board |
|
Positioning Precision |
X Y axis 0.01mm, Z axis 0.0025mm |
|
Extruder |
Directly Drive |
|
Machine Construction |
Fully enclosed hot chamber |
|
Bed Leveling |
Manually/Automatic |
| Temperature | |
|---|---|
|
Max. Nozzle Temperature |
500℃ |
|
Chamber Temperature |
120 ℃ |
|
Platform Max. Temperature |
200℃ |
|
Direct Annealing Temperature |
0~400℃ |
| Software | |
|---|---|
|
Software Bundle |
CreatWare, Simplify 3D, Cura, Slice 3r, etc |
|
Supported File Systems |
STL,OBJ,AMF |
|
Operating System |
Win7/8/10, MacOS |
| Special Function | |
|---|---|
|
Outage Restored |
Save data when power is off |
|
Filament Detection |
Pause printing when filament run out |
|
Direct Annealing System (DAS) |
Annealing process is instant controllable during printing. It aims to provide best quality parts in one time without warping and cracking printing of big size functional materials. |
|
Heat insulation |
Triple heat insulation |
|
Emergency stop switch |
Support emergency stop |
|
High temperature accessories |
High temperature resistance motors, linear rails, belts and circuits to ensure long time high temperature printing. |
| Size & Weight | |
|---|---|
|
Machine Size |
650*600*750 mm |
|
G.W |
100 kg |
|
Packing Size |
820*720*1080mm |
|
N.W |
130 kg |
