Previous slide
Next slide

D600 /  D600 Pro




Powerful for education and small makers

The D600 was created since year of 2016, Its fully enclosed print volume 600*600*600mm is able to make industrial prototype large-scale objects as easy as possible. We upgrade it twice every year with CreatBot’s most advanced technology. If you want to print large models with PLA, ABS, PETG, Carbon fiber, the D600 will be good.

The D600 Pro version was deep developed in year of 2018, It is able to 3D print large size objects with high performance material for industrial application directly. Besides D600 materials, Carbon fiber mixing, Nylon, PC, etc are enhanced options. If you are looking for a very professional industrial 3D printer with large-scale, D600 Pro will be your best choice.

The D600/Pro works perfectly in automotive or aerospace industries, as well as art design, products design, cultural relics reproduction or concept modelling. It brings the large-scale additive manufacturing on more affordable level in prototyping or designing.

D600 Pro Printing Video

Large Build Volume

D600 / D600 Pro print size 600*600*600mm.
In the photo, we can see part of large format 3D printer quality inspection area. Mass production means standard high quality.
(Learn more about the huge 3d printer F1000 in center of the photo)

Nozzle Temprature Up To 420 ℃

D600 and D600 Pro equiped with the 4th generation 1.75mm dual extruders and hotends. The left extruder equipped with 260°C hotend, It is able to print with PLA, ABS, PC, Nylon, Carbon fiber, Flexible, etc. The right extruder 420°C hotend is made of martensite steel, which is able to print high performance materials. The dual hotend is replaceable, which provide more possibility on your application.

420 ℃ Support More Supplies
All metal hotend, more durable
Nozzle height adjustable
Direct Head Driving
The wheel hub weighs 6kg, printed by D600 Pro !

High Precision

We exclusively research and develop the extruder feeding system support high-speed printing, and accuracy can reach high to 0.05mm, it allows to extrude filament steady without block.

Speed up to: 0.05 mm 
Precision up to: 200 mm/s

Servo Motors With Gear Reduction

  • High Accuracy: closed-loop control of position, speed and torque; overcome the problem of lossing step. No layer shift.
  • Good high-speed performance.
  • Stability: timeliness, fast response, no inertia, no delay.
  • Comfort: heat and noise are significantly reduced.

Fully Enclosed Chamber

The whole-steel body not only ensure the stability when printing but also greatly extend the usage period. The fully enclosed chamber can block all external interference. Also this frame can reduce noises, at the same time to provide constant temperature, so that the model won’t deform. The first batch of CreatBot 3D printers have been working for 9 years and more than 30,000 hours.

Accurate Linear Guide Rail

The accurate linear rail structure can print models in accuracy high reach to 4~5 times higher than the other ordinary optical axis printers in mass market. This structure offers accurate filament feeding, so that can print large model fast and perfectly.

Hot Air Chamber 70°C

Hot air chamber can provide constant room temperature so that model won’t deform when printing.(D600 Pro available only)

Easy Touch Screen

The printer has a 4.3″ touch screen, more easy to operate. We also provide One-Key to preheat, print, home as well as other shortcut keys.

Filaments Drying Room

The function is able to dry filaments like Nylon,PC,ABS, which with high water absorption, 45°C and 65°C chamber temperature available.(D600 Pro available only)

HEPA Air Filtration

The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space.

Outage Restored & Filament Detection

The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after power’s on.

The printer will avoid invalid printing by stoping print and warning when filament runs out.

Outage Restored
Filament Detection

Efficient Platform

The platform surface is attached with the 3D printing special stickers, and the printer has vertical thermal conductivity so that can support high thermal efficiency. You can set the parameters to turn off the hot bed automatically after the specified number of layers.

Auto Leveling Platform

Use of 25 points through the BL-Touch probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.(D600 Pro available only)

Filament & Application

We supply high quality CreatBot filament. The models below are commissioned by the cultural relics protection organization and printed by D600 with 5kg big roll of PLA within 80 hours. No extra cares or change filament.

PC prototype 20 hours
PLA prototype 40 hours
PLA prototype 120 hours
Carbon fiber-Nylon 50 hours
Nylon+ 30 hours

Technical Specs


Print Technology

Fused Deposition Modeling

Build Volume

600*600*600 mm

Number of Nozzles



0.05 mm

Layer Resolution

0.05 mm

Filament Diameter

1.75 mm

Filament Compatibility

PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PETG, HIPS, PP, Flexible, TPU, PVA, etc.

Nozzle Diameter

0.4mm (0.3 0.5 0.6 0.8 1.0mm)

Print File Type

STL, OBJ, AMF, Gcode


Power Requirements

100V-110V or 200V-240V / 50-60Hz
(Depending on your country's default voltage)

200V-240V / 50-60Hz (D600 Pro)

Max. Power

1000W~4000W D600 Pro


4.3" Touch Screen with Multi-language

Control Chip

ATmega 2560

Storage Media

U Disk





Power-Coated Steel, Aluminum Casting for Motion Components, POM

Build Plate

Borosilicate glass bed

Build Plate Leveling

Factory Leveled, Adjust Manually Automatic D600 Pro


Directly Drive

Stepper Motors

1.8°Step Angle with 1/16 Micro-stepping

X Y Positioning Precision

5.08 μm

Z Positioning Precision

1.25 μm

Best Printing speed

45 mm/s

Max. Printing speed

120 mm/s


Ambient Operating Temperature

15 ℃~32 ℃

Max. Nozzle Temperature

420 ℃

Max. Bed Temperature

100 ℃

Max. Chamber Temperature
70 ℃ D600 Pro
Filaments Drying Temperature
45 ℃/65 ℃ D600 Pro

Software Bundle

CreatWare, Simplify 3D, Cura, Slice 3r, etc

Supported File Systems


Operating System

Win7/8/10, MacOS

Special Function

Outage Restored

Save data when power is off

Filament Detection

Pause printing when filament run out

Automatic Shut-down

Turn off the power automatically when printing is complete

Size & Weight

Product Dimensions & Weight

915*845*1085mm 125kg

Packing Size & Weight

940*1010*1320mm 165kg(Pallet)