-Faster Speed 600mm/s
-Bigger than bigger
-325*325*315 mm
-High-Flow 35mm³/s
-Acceleration: 20000mm/s²
SUITABLE FOR MULTIPLE GRADES OF MATERIALS
-Faster Speed 600mm/s
-Bigger than bigger
-325*325*315 mm
-High-Flow 35mm³/s
-Acceleration: 20000mm/s²
Ultra-stable, reinforced with metal crossbeams at the bottom, resistant to deformation.
Improved surface straightness, and a 60% lower error deflection.
Highly durable and No need for frequent maintenance.
Typically last a lifetime without the need for replacement.
Reduce the motion Inertia and improve the motion speed.
TMC2209 silent drive less noise.
Copper alloy nozzle for better thermal conductivity, smooth printing and to be more durable.
Hardened steel nozzle for abrasive materials, and long term usage.
Both 350℃ Max Print Temp.
Active Heating Device
Maximum Temp 65℃
High efficiency printing PET-CF,PAHT-CF etc
Chamber circulation fan with activated carbon air filter.
The higher the temperature in the heated chamber, the larger the material range that can be printed. The heated chamber ensure that the part is built uniformly without the generation of internal stresses.
Klipper Adaptive Meshing and Purging, fast ensure flawless first layer for every 3D print.
Excellent adhesion,
No warping trouble,
Easy to remove the prints.
| Technical Parameter | |||||||
|---|---|---|---|---|---|---|---|
|
Building volume |
325*325*315mm |
||||||
|
Dimensions |
553*553*601mm |
||||||
|
Net weight |
30.2 |
||||||
|
Printing Speed |
≤600mm/s |
||||||
|
Extruder Flow: |
35mm³/s |
||||||
|
Extruder Temp |
≤350°C |
||||||
|
Hotend (Included) |
Copper alloy nozzle hotend Hardened steel nozzle hotend |
||||||
|
Auxiliary Part Cooling Fan |
Yes |
||||||
|
Chamber Temperature Control |
65°C Independent Chamber Heating |
||||||
|
Chamber Circulation Fan |
Yes |
||||||
|
Screen |
5.0 inch 800*480 touch screen |
||||||
|
Seal print |
Dryer Box + Desiccant |
||||||
|
Connection Options |
150M 2.4G Wi-Fi |
||||||
|
Rated Power |
900W |
||||||
|
Recommended Filament |
PAHT-CF,PET-CF,PA12-CF |
||||||
|
Structure |
CoreXY |
||||||
|
Z Axis |
Double Z axis |
||||||
|
X axis |
High-grade hardness steel linear hollow optical axis |
||||||
|
Firmware |
Klipper |
||||||
|
Printing Acceleration |
20000mm/s² |
||||||
|
Printing Accuracy |
±0.1 mm |
||||||
|
Filament diameter |
1.75mm |
||||||
|
Bed Leveling |
Automatic Leveling |
||||||
|
Extruder transmission ratio |
9.5:1 |
||||||
|
Hot end |
Ceramic Heating Core |
||||||
|
Extruder |
High-flow Direct Drive Extruder |
||||||
|
Nozzle diameter |
0.4mm (0.2,0.6,0.8mm Optional) |
||||||
|
Hot bed temperature |
≤120℃ |
||||||
|
Filament Detection |
Yes |
||||||
|
Resonance Compensation |
Yes |
||||||
|
Pressure Advance |
Yes |
||||||
|
Voltage |
100-240VAC, 50/60Hz |
||||||
|
Main Processor |
|
||||||
|
Operating System |
Windows, MacOS, Linux |
||||||
